Step 3: Connect And Power On The Scanner - Visioneer One Touch 9420 User Manual

14 V O
ISIONEER NE
T 9420 USB S
OUCH CANNER
S 3: C
TEP ONNECT AND
Make sure its locking tab is unlocked, then connect the scanner.
To connect your scanner:
1. Remove any tape from the USB cable.
2. Using the steps on the screen as your guide, plug the flat, computer
end of the USB cable into an available USB 1.1 or USB 2.0 port on
the computer.
Scanner plug
3. Plug the other end of the USB cable into the scanner's USB port.
If the plug does not attach easily, make sure that you are plugging it
in correctly. Do not force the plug into either connection.
You can also connect the scanner to a USB hub. If you use a USB
hub, it must have its own power supply already plugged into an
electrical outlet.
U ' G
SER S UIDE
P O
OWER
Computer plug
USB
S
N THE CANNER