Connect The Power Cord - Visioneer PATRIOT P90 User Manual

V P P90
® TM
ISIONEER ATRIOT
4. Remove any tape or protective foam from inside the feeder. Adjust the paper guides as needed.
The above illustrations are for example purposes only. Your scanner's packaging may vary slightly.
C P
ONNECT THE OWER
Note: Only use the power supply included with your scanner. Connecting any other type of power supply may
damage your scanner, and will void its warranty.
1. Plug the power supply into the power port on the scanner.
2. Plug the power cord into the power supply and into a wall outlet.
12
C
ORD
S S
CANNER ETUP
S U ' G
CANNER SER S UIDE