Installation Procedure - Planet Networking & Communication ADW-4302 Manual

WLAN LED On – Wireless enabled.
Off - No Wireless connections currently exist.
Flashing - Data is being transmitted or received via the Wire-
less access point. This includes "network traffic" as well as user
data.
ADSL On - ADSL connection is available.
Off - No ADSL connection.
Flashing - Data is being transmitted or received via the ADSL
connection.
Rear Panel
Power port
10/100BaseT
LAN connections
Reset Button
(Reset to Defaults)
ADSL port

Installation Procedure

2
Connect the supplied power adapter here.
Use standard LAN cables (RJ-45 connectors) to con-
nect your PCs to these ports.
This button will reset the ADW-4302 to the factory default
settings.
To do this, press and hold the Reset Button for five (5)
seconds, until the Status LED is lit, then release the Reset
Button, and wait the ADW-4302 to restart using the factory
default values.
Connect this port to your ADSL line.