Table of Contents
Advertisement
安裝方法
Assembly
與脫卸次序相反，安裝各個部位。
Assemble the dust bin unit in reverse order of disassembly.
1.
如圖所示對準後，旋轉格狀過濾網。
Align the marks and turn the mesh filter as shown.
格狀過濾網
Mesh filter
2.
如圖所示對準，將格狀過濾網裝回集塵盒，再
原樣裝回過濾網。（若沒對準則無法安裝到位）
Put the mesh filter into the dust bin while
aligning the mark and 2 ribs location, and then
put the filter back to its original position.
(It won't fit unless it is set correctly)
3.
如圖所示原樣裝回蓋部。
Put the cover back to its original position as shown.
蓋部
Cover
4.
扣好扣子。
Buckle them as shown.
10
維護保養
地板吸嘴的維護保養
Cleaning the floor nozzle
1.
沿著溝槽，用剪刀剪斷纏繞的垃圾。
Cut off carpet piles and lint entangled around
the beater bar inside of the floor nozzle with a
pair of scissors.
旋轉毛刷
Beater bar
2.
旋轉毛刷蓋，使
對準 ，打開毛刷蓋，
取出旋轉毛刷。
Release the brush cover by rotating the brush
cover to align
with
beater bar.
毛刷蓋
Brush cover
3.
用水清洗旋轉毛刷。
Wash the beater bar with cold water.
• 水洗後，請充分乾燥。
Dry it completely after washing.
4.
如圖所示從毛刷 A 側插入旋轉毛刷，裝上毛
刷蓋，旋轉毛刷蓋，使
刷蓋。
Insert Side A of the beater bar into the nozzle
and ensure the brush cover locked by rotating
it until
aligning with
A 側
Side A
Maintenance
, then take out the
對準 ，鎖住毛
.
B 側
Side B
Advertisement
Table of Contents
