Brionvega RADIO.CUBO TS522D+S Manual page 14

AIRWAVE WARNINGS
This unit uses 2.4 GHz radio frequencies, also used by other wireless systems (such as
microwave ovens and cordless telephones).
If there is noise on the TV screen, it is possible that this unit (or units supported by it) is
causing interference with the signals from the input connector of your TV, VCR, satellite
tuner, etc.
In this case, increase the distance between the antenna input connector and this unit
(including the products it supports).
SIM2 BV International is not responsible for any malfunction of the product due to errors/
malfunctions associated with its connection and/or equipment it is connected to. Contact the
manufacturer of the product you want to pair.
ATTENTION TO ThE AC ADAPTER
Ensure to firmly grasp the case of the AC adapter if you need to unplug it from the outlet. If
you pull the power cord, it may get damaged, causing a fire and/or electric shock. Do not try
to unplug the AC adapter with your bare hands. This may cause electric shock.
Do not leave the power cord of the AC adapter into the socket if the connection is unreliable,
also when the plug is completely inserted into the socket. This may generate enough heat to
cause a fire. Consult a dealer or an electrician to replace the outlet.
INFORMATION ON ThE BATTERY
To charge the battery, plug the TS522D+S in and place it in Standby. From full discharge,
the battery will be completely charged within approximately 3.5 hours. The battery does not
charge while the TS522D+S is plugged in and turned on.
BATTERY WARNINGS
The battery used in this device may present a risk of fire or chemical burn if mistreated. Do
not disassemble, heat above 113°F (45°C), or incinerate.
In the event of a battery leaking, do not allow the liquid to come in contact with the skin or
eyes. If contact has been made,wash the affected area with copious amounts of water and
seek medical advice.
Do not attempt to replace the speaker battery. Contact SIM2 BV customer service.
26
CAUTION
This unit is not waterproof. To prevent fire or shock hazards, do not place this unit near water-
filled containers (such as flower pots, or similar), and do not expose it to dripping, splashing,
rain, or moisture.
ENVIRONMENT AND DISPOSAL
It may contain materials which constitute a health and environmental hazard. To prevent
harmful materials from being released into the environment, SIM2 BV International provides
the following information regarding the disposal and recycling, following the decommissioning
of the product.
Waste electrical and electronic materials (WEEE) should never be
disposed of in normal urban waste disposal facilities (residential garbage
collection).
This symbol on the products, packaging, and/or accompanying documents,
means that used electrical and electronic equipment should be disposed
of in an appropriate manner at the end of useful life.
For proper treatment, recovery, and recycling of used products, please
refer to the applicable collection points, in accordance with your national
legislation.
You can give your contribution to the environment by following these simple steps:
When you no longer wish to use your electrical and electronic equipment, take it to your local
waste disposal facility for recycling.
You may return your old equipment to your dealer free of charge when you buy a new product
which is equivalent to or has the same functions as the old one.
Contact SIM2 BV International to find your local dealer.
If you need more information regarding recycling, reuse, and product exchanges, please
contact our customer service at the number provided in the manual.
Lastly, we suggest further measures to safeguard the environment, such as recycling of
internal and external packaging (including the one used for shipping) the product was
delivered in.
With your help, we can reduce the amount of environmental resources required to manufacture
electric and electronic equipment, reduce the use of waste landfills for used equipment and, in
general, improve our quality of life by ensuring that hazardous materials are correctly disposed
of.
Incorrect treatment of the product at the end of life and failure to follow the above disposal
instructions are punishable under local legislation.
27