Page 1
Motorized vehicle SupaLite 4 MDSS GmbH Schiffgraben 41 30175 Hannover, Germany Distributor: User Manual You must read this manual before using your SupaLite4 P/N: 9037500 Rev. 01/20...
What You Need to Know About Safety Instructions ● Please read this manual before using your SupaLite 4. ● Check the frame lock and all clamps before using SupaLite 4. Warning and Important Safety Instructions appeared in this manual ● Do not turn your Scooter “On” before you are seated and ready are not meant to cover all possible conditions and situations that to go.
Page 4
D. MOTOR VEHICLE SAFETY A. ENVIRONMENTAL CONDITIONS WARNING: The scooter is i. Never sit on this scooter while in a moving vehicle. not designed for use in a heavy rain, or in snowy or icy conditions. ii. Always move to an approved vehicle seat. i.
ELECTROMAGNETIC INTERFERENCE i. Always move your scooter as close as you can to the object you wish to reach. ii. Turn off all power to your scooter. If you fail to do so, you may I t i s v e r y i m p o r t a n t t h a t y o u r e a d touch the throttle control lever and cause your scooter to move t h i s i n f o r m a t i o n r e g a r d i n g t h e p o s s i b l e e f f e c t s o f when you do not expect it.
Page 6
● Important Information 1) 20 Volts per meter (V/m) is a generally achievable and useful operate hand-held personal immunity level against interference from radio wave sources (as of communication devices such as citizens band (CB) radios, or turn ON May 1994) (the higher the level, the greater the protection); personal communication devices and cellular phones while the 2) This product has an immunity level of following: motorized scooter is turned ON.
FOLDABLE SEAT FRAME ASSEMBLE THE SEAT To open the seat frame Assemble the seat frame in the manner illustrated. Pull out the knob “P” in the direction of the arrow and lift the seat tube “O” up as illustrated. The ARROW must be pointing to the front when assembling the seat to the frame.
TO OPEN THE SUPALITE ● Use one hand to hold the tiller handle and use the other hand to push the lock pin lever (A) per the illustration and lift the handle. ● Fit the seat onto the frame, Continue lifting the tiller until you hear the “click”, the locking into and insert the seat frame position.
ANTI-TIP WHEEL Ensure that the anti-tip wheels are extended and locked in position “H” when driving on sloping ground. (As illustrated below) ● Inflate the tyres to the maximum of 40 PSI. Position “H” provides the greatest stability. Return the sliding tube to position “J” for transportation or disassembly.
SEAT POST CLAMP ARM REST - OPTIONAL ● Insert armrest as below illustration. ● Insert the seat frame tubes into the corresponding holes on the main frame, and then tighten the lever clamp “K” as illustration. BASKET - OPTIONAL ● Tighten the screws L. ●...
FLAT PACK KIT: (optional) To store folded seat onto scooter Assemble the guide pin for each seat post as per illustration. When the seat is folded and positioned on the scooter, the seat post clamp “K” must be tightened securely. SPARE BATTERY - OPTIONAL Make sure that stop pin “J”...
DRIVE WHEEL RELEASE MECHANISM CRUISE CONTROL, LIGHTS AND SWITCHES ● This scooter is equipped with drive wheel release mechanism. Your SupaLite 4 can be moved manually after the drive wheels are released. Do not operate this device on the slope.
OPTIONAL CRUISE CONTROL- If the scooter does not move after the re-set, When cruise control is activated, the scooter automatically one of the following indicator lights may be displayed: maintains the stored speed. The magnetic brake either turn off or connectors are loose.
ELECTRONIC STABILITY CONTROL (ESC) PRECAUTION This is the most significant advancement in mobility scooter safety ever designed and has dramatically reduced accidents due to ● When using your scooter for the first time you should practice operator misuse. Turning corners at excessive speed has always at slow speed in a flat open area free of obstacles, until you are been one of confident in turning, stopping, reversing and judging braking...
FOLD THE SUPALITE HOW TO CLEAN THE SCOOTER ● Remove battery pack from scooter Avoid power spray water washing of the scooter as this could cause damage to the wire connectors and electronic system. Completely dry off the scooter, if necessary use a dry cloth after cleaning your scooter.
CHARGE BATTERY ● When you get your new battery, put it on charge for 24 hours. ● Use one hand to hold the ● When recharging your battery, always charge it until the light on handle, and use the other the charger turns green.
Page 17
Estimated travel distance with 100kg load Or remove the battery from scooter, and charge battery individual. wing the charger’s cover away (T) as arrow direction. ● S Plug the charger power cord (Round plug) (S) into the socket 24V 11.6ah 10 - 13 Km ●...
2. Use the battery module: reset by unplugging the charger from the battery and 1. The battery module is particularly designed for Supascoota power supply then reconnect again. mobility scooters only. Do not use battery module on any other if the LED on charger flashes red/green alternately or equipment.
BATTERY SAFETY INSTRUCTION Important notes to help prolong the life of the battery: • Before the first use of your battery, put it on charge for 24 1. Do not disassemble or modify battery module. The battery hours. module contains safety and protection devices, If damaged, •...
Specifications During use, charge, or storage Number of Wheels 1. Do not put battery module in your pockets or bags together Front Wheel Size 175mm (7”) with metal objects such as golf clubs, necklaces, hairpins, Rear Wheel Size 200mm (8”) coins, or screws.
I / we acknowledge that the SupaLite 4 has been delivered in good Frame: 2 years. order and operating condition and that I / we have been instructed in the care and maintenance, safe operation and proper use of the unit.
Need help?
Do you have a question about the SUPALITE 4 and is the answer not in the manual?
Questions and answers