1. Manuals
  2. Brands
  3. VIGO Manuals
  4. Shower Cabins
  5. VG06021
  6. Installation manual

VIGO VG06021 Installation Manual

Shower enclosure
Hide thumbs Also See for VG06021:
Table of Contents

Advertisement

Quick Links

Download this manual
VIGO INDUSTRIES INSTALLATION GUIDE FOR
SHOWER ENCLOSURE (MODEL VG06021)
!
SAFETY PRECAUTIONS
This Installation Guide uses the following symbols to indicate important information.
Always observe the instructions indicated by these symbols.
!
WARNING
Instructions that, if ignored, could result in death or serious personal injury caused by
incorrect handling or installation of the product. These instructions must be observed for
safe installation.
!
CAUTION
The instructions for the following unit is based off of the Vigo brand shower base. The
instructions can not be provided for any other installation other than that of the Vigo brand.
The warranty will be voided if the following was not performed properly.
IMPORTANT
Maintenance and other important non-personal injury and non-material damage instructions
or statements that should be observed.
It is highly advised to dry fit the unit prior to any installation.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VG06021 and is the answer not in the manual?

Questions and answers

Related Manuals for VIGO VG06021

Summary of Contents for VIGO VG06021

  • Page 1 CAUTION The instructions for the following unit is based off of the Vigo brand shower base. The instructions can not be provided for any other installation other than that of the Vigo brand. The warranty will be voided if the following was not performed properly.
  • Page 2 17. Plastic anchor green (8pc) 18. Plastic anchor white (8pc) 19. Hex screw cover (32pc) 20. Clear PVC shims (1pack) 21. Allen key pack (1 pack) GLASS THICKNESS 1/4" NOTE: INSTALLATION MUST BE DONE BY A QUALIFIED, LICENSED PLUMBER. MODEL VG06021...
  • Page 3 40 X 40 38 1/8" 38 1/8" 16 3/4" 15 7/8" 16 5/8"x71 5/8" 15 3/8"x70 3/4" - WITH HARDWARE AND WITH CORRESPONDING VIGO BRAND BASE VG06029 (FULLY INSTALLED) #4- SIDE GLASS #11- DOOR (97012) DIM. "A" DIM. "B" DIM. "C"...

  • Page 4: Before Starting

    GLASS BREAKAGE AND, CONSEQUENTLY, CAUSE PERSONAL INJURY OR DEATH. BEFORE STARTING Compare items on your invoice with what you have received. Carefully review the Packing List on page 2. If any items are missing contact Vigo Industries at 1-866-591-7792. REQUIRED TOOLS Square and/or Phillips #1 and #2 screwdriver Flat head screwdriver Electric drill plus 1/32", 3/32", 1/8"...
  • Page 5 Properly apply silicone to the wall and base joints. Make sure to read corresponding base instructions carefully prior to install on the Vigo Brand Shower Door System. Failure to do so can cause water leakage and bodily harm.
  • Page 6 LEAVE A GAP OF DOOR SIDE 3/8" [10MM] FROM THE BOTTOM OF FIG.4 THE GLASS WALL HEX SCREW (15) OUTSIDE OF SHOWER HEX SCREW INSIDE OF SHOWER SIDE GLASS PANEL GLASS SUPPORT (6) GASKET VIEW FROM THE TOP FIG.5 MODEL VG06021...

  • Page 7: Hinge Installation

    SCREW THIS HALF OF THE HINGE TO THE SIDE GLASS PANEL VIEW FROM OUTSIDE OF THE CABIN FIG.6 HINGE (7) HINGE (7) INSIDE VIEW SIDE GLASS CLEAR PANEL (4) CLEAR PVC SHIMS PVC SHIMS SIDE GLASS PANEL (4) FIG.6A INSIDE VIEW MODEL VG06021...
  • Page 8 2. Cutting/finishing is needed but only after fully installing and only at the top of the unit. THIS SIDE MUST LOOK INSIDE THE CABIN THIS SIDE MUST LOOK INSIDE THE CABIN MAKE SURE TO MAKE SURE TO MEET THE MEET THE BOTTOM OF THE BOTTOM OF THE GLASS GLASS FIG.7 MODEL VG06021...

  • Page 9: Installing The Door

    Never install without shims, this can cause the glass to break causing property damage and bodily harm. OUTSIDE OF THE CABIN HINGE (7) SIDE GLASS PANEL (4) DOOR (11) THIN INSIDE OF GASKETS PLATE THE CABIN HEX SCREW VIEW FROM THE TOP VIEW FROM INSIDE FIG.8 MODEL VG06021...

  • Page 10: Handle Installation

    Repeat Steps 1 through 6 to install the other support assembly to the other side glass panel. WALL LEVEL WALL SIDE PANEL FIG.9 HANDLE INSTALLATION Assemble the door handles (#10) to the door (#11) as shown. [SEE FIG.10] Repeat pervious steps to install the door handle on the other door. FIG.10 MODEL VG06021...
  • Page 11 2. Cutting/finishing is needed but only after fully installing and only at the top of the unit. HINGE SIDE HANDLE SIDE MAKE SURE TO MEET THE BOTTOM OF THE GLASS THIS SIDE MUST LOOK INSIDE THE CABIN FIG.11 MODEL VG06021...
  • Page 12 INSTALLING HEX SCREW COVERS Install hex screw covers (#19) to the hex screws that mount the hinges, wall connectors, and glass supports. IMPORTANT WAIT 24 HOURS BEFORE USING SHOWER DO NOT ALLOW WATER TO DIRECTLY HIT DOOR SEAL STRIPS MODEL VG06021...
  • Page 13 If you are experiencing water build up in the top portion of the rail, it is recommended to drill small holes on the top inside portion. Space holes every 6"-8". Stay within 3" from the end of the rail. [SEE FIG. 12] INSIDE INSIDE OUTSIDE OUTSIDE FIG.12 MODEL VG06021...
  • Page 14 Subject to the Warranty Service provision below, any product reported to the authorized dealer or to VIGO as being defective within the warranty period will be repaired or replaced (with a product of equal value) at the option of VIGO. This warranty extends to the original owner or end-user and is not transferable to a subsequent owner.

Table of Contents