Connecting The Power/ Leveling The Unit - Whirlpool EZ CONNECT Installation Manual

Connecting the power/ leveling the unit

Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
1. Plug the power cord into its AC outlet, and
push the refrigerator back against the wall.
2. Place a level on top of the cabinet. If you
need to relevel the refrigerator, follow the
procedure to adjust the front casters, as
outlined in your refrigerator's "Use and Care
Guide."
3. Check the position of the ice maker. If it is
crooked and needs to be adjusted, loosen
the mounting screw and bracket screw
(see the side diagram), position the ice
maker as desired then tighten the screws.
14
WARNING
Bracket
Mounting
Screw
Screw