Installing batteries
Installing the remote control batteries
1. Open the battery cover on the back of the remote control.
2. Install two AAA size(1.5V) batteries. Match the "+" and "-" signs on the
batteries to the signs on the battery compartment.
3. Close the battery cover.
Note:
1.Dispose of your batteries in a designated disposal area. Do not throw the
batteries into fire.
2. Do not mix battery types or combine used batteries with new ones.
3. Remove depleted batteries immediately to prevent battery acid from leaking
into the battery compartment.
4. If you do not intend to use the remote control for a long time, remove the
batteries.
5.The effective range of remote control is suggested in the figure below.
Remote control range
1. The remote control distance: 8 meters in front of the TV set.
2. The remote control angle: taking the television infrared light receiver window
as an apex, 6 meters away, its controlled angle (left to right) is within 30
degrees, while the vertical angle (up to down)is within 30 degrees.
Using the Remote Control
11