Basic Operation - Hisense LEDN55T28GP User Manual

Turning your TV on and off
- To turn your TV on: Connect the TV to an AC power outlet and turn on the power switch
located below the front right hand side of unit. A few seconds later an image will appear
on the screen.
- Turning off to standby mode: Press [Power Standby] on the front panel or on the remote
control to switch to standby mode. You can activate the unit again by pressing[Power
Standby].
Notes: Turn the power switch off when you do not intend to use the TV for long periods,
for example overnight. Remove the connection from the wall power outlet if you do not
intend to use the unit for longer period, for example, if you plan to be away for a few days.
Wait at least 5 seconds after turning off if you want to turn on the TV again.
Selecting the video source
- Select the video source depending on the video device you have connected to the TV
set .TV, AV, Component, HDMI
- Press [Source] to select the video source . When the list of video source appears, press
/
[ ] to select the source, then press [OK] to enter.
Adjusting the volume
/
- Press [VOL VOLV ] to increase or decrease the volume. Press [Mute] to turn off the
Audio. Press [Mute] again to turn on the Audio.
Changing channels
/
- Press [CH CHV] to go to the
buttons to select a channel. For example, to select channel 12, press 1, then 2 within 3
seconds.
Selecting the sound mode
- Press [Sound] one or more times to select the sound mode which you want. Standard,
Live1, Live2, Theater, Music, Speech, User(a mode that you set) mode can be selected.
Selecting the picture mode
- Press [Picture] one or more times to select the picture mode which you want. You can
select Standard, Stadium, Game, Cinema, Concert, Studio and User (a mode that you
defined) mode.
Selecting the aspect ratio
- Press [Zoom] to display the aspect ratio, then press [
[►/OK] to confirm.
- You can select Auto, Full screen, Normal, Zoom 1, Zoom 2, Smart Zoom, Dot To Dot
mode.
Note: The option of aspect is vary with different source.

Basic Operation

, VGA and DMP can be chose as the video source.
previous or next channel. Either, Press the number
/ ]
13
to select one mode, press