Advertisement
www.freeservicemanuals.info
MAINTENANCE AND TROUBLESHOOTING
Troubleshooting
If you suspect something is wrong, immediately switch power off. Immediately stop using it and call the store where you purchased it.
Never try to repair the unit yourself because it is dangerous to do so.
General
Car's engine switch is not on.
Turn on the car ignition.
Cable is not correctly connected.
Check connection.
No power or
Fuse is burnt.
no sound
Check volume or mute on / off.
If the above solutions cannot help,
press the RESET hole.
Disc
Disc is upside down.
Place disc right way up, with the label
Disc is
inserted
but
side up.
no sound.
Disc is dirty or damaged
Clean disc or change disc.
Disc sound skips,
Disc is dirty or damaged.
Clean CD or change another CD.
tone quality is low.
Mounting angle is over 30
Adjust mounting angle to less than 30.
Sound skips due
to vibration.
Unstable mounting.
Mount the unit securely with the
mounting parts.
1-10
Replace fuse.
o
.
o
Radio
Interference noise
Station is too far, or signals are too weak.
during broadcast
Select other stations of higher signal level.
Battery cable is not correctly connected.
Preset station
Connect the battery cable to the live
lost
terminal.
Error Display Messages
Disc is not CD or contains no MP3 files.
Disc upside down.
Recovery error, check the disc.
Disc format error, check the disc.
Disc mechanism error
Press
In case that the disc cannot be
ejected by pressing
press the RESET switch and press
the
If you are still unable to eject
consult your dealer.
button to eject the disc.
button,
button again.
Advertisement
