Ivoclar digital PrograMill One Operating Instructions Manual page 99

7.3.3 Inserting blocks
You can either place blocks with help of the Wizard in the main menu [ToDo] or, as an
advanced user, remove them independently from the material and tool changer via the main
menu [Service - Blocks].
In the menu [ToDo] only the blocks which are required for the milling jobs will be displayed.
In the menu [Service - Blocks] you have access to all block holders.
The options will be described below.
Operating the material and tool changer via the main menu [ToDo]

You are in the main menu [ToDo].

The material and tool changer is not active.

In the [Blocks] section, in the list of
required blocks, tap the block of your
choice.

The material and tool changer will be brought into position and the block holder will be
provided at the loading aid.

You can insert the block ("Inserting the block into the device using the loading aid",
page 101).

The app shows a Wizard which will guide you step by step through the insertion process.
Editing Milling Jobs
Tetric® CAD HT A3 C14
IPS e.max® CAD HT A1 I12
IPS Empress® CAD LT B1 C14
99