Ivoclar digital PrograMill One Operating Instructions Manual page 91

Operating the material and tool changer via the main menu [Service]

You are in the main menu [Service].

The material and tool changer is not active.
1. Select the sub-menu [Tools]
2. In the list of tools, tap on the position of
your choice.

The material and tool changer will be brought into position and the tool holder will be
provided at the loading aid.

You can now insert the tool ("Inserting the tools into the device using the loading aid",
page 92).

The app shows a Wizard which will guide you step by step through the insertion process.
Editing Milling Jobs
91