Ivoclar digital PrograMill One Operating Instructions Manual page 85

7.2.2 Changing / Refilling the water of the tank
If you want to change or refill the water only, proceed as follows:
1. Completely remove the tank from the
device (1).
2. Turn the tank lid half-turn in the
direction of the arrow (2) until it is
released from the tank.
3. Remove the tank lid from the tank.
4. Dispose of the filter contents according to the instruction (see safety data sheet Coolant
Concentrate PrograMill Fluid for One, "Supporting documents", page 9).
5. Dispose of the tank contents according to the instruction (see safety data sheet Coolant
Concentrate PrograMill Fluid for One, "Supporting documents", page 9).
6. Fill the tank with water up to the middle
of the marking (between "min." and
"max.") with distilled water (according
to VDE0510).
7. Fill the tank up to the fill level "max."
with PrograMill Fluid for One coolant
concentrate.
Editing Milling Jobs
2.
1.
85