Using The Pc Settings - Toshiba 24PB2 Series Owner's Manual

Using List mode
1
Press to access teletext.
100 TEXT M00
100 200
Green
Red
The four choices at the bottom of the screen
are now number — 100, 200, 300 and 400,
which have been programmed into the TV's
memory.
2
To view these pages, use the coloured
prompt buttons.
e.g. press the Green button to view page 200.
3
If you want to change these stored pages,
press the coloured button for the colour you
want to change.
e.g. Press the Green button and enter the
3-digit number.
This number will change and blinking.
4
Press Q to store your choice. The bars at
the bottom of the screen will fl ash white.
5
You may view other pages by simply entering
the 3-digit page number — but NEVER press
Q or you will lose the favorite already stored.
Teletext buttons on the remote control
Below is an introduction to the teletext buttons
on your remote control and their functions.
To display a page of teletext:
Press to display teletext. Press again to
superimpose the teletext over a normal broadcast
picture. Press again to return to normal TV mode.
To display an index/initial page:
In Auto-mode
Press to access the index page. The one
displayed is dependant on the broadcaster.
In List-mode
Press to return to the 100 page or initial
page.
To reveal concealed text:
Some pages cover topics such as quizzes and
jokes. To discover the solutions, press
To hold a wanted page:
This function is included as it is part of the
broadcast teletext system but you will not need
it as this TV allows you to control the display of
sub-pages.
14:58:55
300 400
Blue
Yellow
.
– 17 –
To enlarge the teletext display size:
Press once to enlarge the top half of the
page, press again to enlarge the bottom half of
the page. Press again to revert to the normal
size.
To select a page while viewing a normal
picture:
When in teletext mode, if a page selection
is made and then
picture will be displayed. The TV will indicate
when the page is present by displaying the title
bar of the text page at the top of the screen.
Press to view the page.
Note:
It will not be possible to change programme
position while in Teletext mode, you will have
to cancel the teletext fi rst by pressing
return to a normal TV picture.
To select the time display:
If you press while watching a normal TV
broadcast, you will see a time display from the
broadcaster. It will remain on the screen for
about 5 seconds.
9:56 and 25 seconds p.m.

Using the PC Settings

• First connect the PC and press
video input mode list appears on the screen,
then press  or  and Q in order to select
the PC input mode (- page 14).
• This function may not be available for some
signal or if no signal is received.
• The optimum points of the Clock Phase
and Sampling Clock adjustments may be
incomprehensible according to the input signals.
Adjusting the picture position
• Use menus: SETUP and PC Settings
• Use items: Horizontal Position and Vertical
Position
Adjusting the Clock Phase of the picture
If the Clock Phase, which synchronize the PC
signal and LCD display, is not optimized, the
picture will blur.
This function enables you to adjust Clock
Phase and display a clear picture.
is pressed, a normal
to
21:56:25
until the