Connecting An Aerial; Exploring Your New Tv; Tv Panel And Remote Controls - Toshiba 24PB2 Series Owner's Manual

Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC
in the United States and other countries.

Connecting an aerial

Optimum reception of colour requires a good
signal and will generally mean that an outdoor
aerial must be used.
The exact type and positioning of the aerial will
depend upon your particular area.
Your Toshiba dealer or service personnel can best
advise you on which aerial to use in your area.
Before connecting the aerial cable, turn off all
main power switches.
VHF and/or
UHF aerial
Media Recorder
IN
OUT
Aerial cable
(75 7 coaxial) (not supplied)
300 7 twin-lead feeder
Aerial adaptor
75 7
(not supplied)
aerial
terminal
75 7 coaxial cable
Plug
75 7 aerial
(not supplied)
terminal

Exploring your new TV

Installing the remote control batteries
Remove the battery cover.
Insert two R03 (AAA) batteries matching the –/+
polarities of the battery to the –/+ marks inside
the battery compartment.
Cautions:
• Dispose of batteries in a designated disposal
area. Batteries must not be exposed to
excessive heat such as sunshine, fi re or the like.
• Attention should be drawn to the environmental
aspects of battery disposal.
• Never mix battery types or combine used
batteries with new ones.
Notes:
• If the remote control does not operate
correctly, or if the operating range becomes
reduced, replace both batteries with new ones.
• If the batteries are dead or if you will not use
the remote control for a long time, remove the
batteries to prevent battery acid from leaking
into the battery compartment.
Effective range
TV back view

TV panel and remote controls

• You can operate your TV using the buttons on
the side panel or the remote control. The back
of the panel provide the terminal connections
to connect other equipment to your TV.
Point the
brightness sensor
(- page 14)
– 5 –
within 5 m
TV front view
1
Left side view
2
3
4
6 5
8
7
10
9
11