Example Layouts - Bosch DCN Wireless Installation And User Instructions Manual

DCN Wireless | Installation and User Instructions | System Design and Planning
3.6.6 Bending
The minimum bend radius of a 90 degree bend in an
LBB4416 cable is 110 mm (refer to figure 3.3). A
180 degree bend is the same as two 90 degree bends.
R=110 mm
figure 3.3: Bend radius
3.6.7 Coiling
The minimum coiling radius of an LBB4416 cable is
110 mm (refer to figure 3.4).
figure 3.4: Coiling radius
3.7

Example layouts

3.7.1 Introduction
The number and type of devices that make the optical
network give the layout of the optical network. This
chapter shows examples of the possible layouts of
optical networks.
Bosch Security Systems | 2007-02 | 9922 141 70691 en
R=110 mm
en | 25