Cobranet; User Set-Up; Public Areas And Walkways; Headphones/Headsets - Bosch DCN Wireless Installation And User Instructions Manual

Wireless discussion system
Hide thumbs Also See for DCN Wireless:
Table of Contents

Advertisement

DCN Wireless | Installation and User Instructions | System Design and Planning
6

CobraNet

CobraNet is a standard for the transport of real-time
digital audio and control data through an Ethernet
network. A CobraNet network can transport a
maximum of 64 channels of 48 kHz, 20-bit audio
through a 100 Mbit link connection in each direction.
Many manufacturers of professional audio devices
support the CobraNet standard.
The DCN Wireless digital congress network can
connect to CobraNet networks with the LBB4404/00
Cobranet Interface. For example, you can use the
LBB4404/00 Cobranet Interface to:
Benefit from Ethernet infrastructure
Transport audio signals over large distances
Note
Refer to the DCN Next Generation Installation
and User Instructions for the LBB4404/00
Cobranet Interface.
PC data, for example data from the DCN Wireless
Open Interface can co-exist with CobraNet data on the
same Ethernet network when you use managed
Ethernet switches that are approved by Peak Audio.
Note
Refer to the website of Peak Audio
(www.peakaudio.com) for:
More data about CobraNet networks.
A list of approved Ethernet switches.
Bosch Security Systems | 2007-02 | 9922 141 70691 en
7

User set-up

7. 1

Public areas and walkways

Keep public areas clear of system and extension cables
and connections.
7.2

Headphones/headsets

Put headphones or headsets with:
Wireless discussion units.
Interpreter desks.
Channel selector.
Integrus receivers.
Acoustic feedback between the connected headphones
or headsets and the microphone occurs when:
The volume level is set too high.
The headphones are too close to activated
microphones.
7.3

Speaking distance

The recommended speaking distance from the
microphone is 0.2 m to 0.4 m.
7.4

Interpreter booths

Make sure each interpreter booth has sufficient
dimensions. The International Organization for
Standardization (ISO) gives the specification for
interpreter booths. Refer to standard ISO 2603 'Booths
for simultaneous interpretation - General characteristics
and equipment' for more data.
en | 29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents