Table of Contents
Advertisement
Quick Links
Contents
Introduction ................................................................................ 2
Unpacking ..................................................................................... 3
Placement & Ventilation ............................................................. 3
Care & Maintenance .................................................................... 4
Precautions .................................................................................. 5
Front Panel Functions ................................................................. 6
Rear Panel Functions................................................................... 7
Remote Control Functions ......................................................... 10
Installation & Operation ............................................................. 11
Product Features ........................................................................ 14
Troubleshooting .......................................................................... 16
Specifications .............................................................................. 17
Index ............................................................................................. 18
All operational, technical and descriptive material in this publication
is subject to change at any time without notice. For further product
information or queries, please contact your Plinius dealer.
Plinius products are designed and manufactured by
Plinius Audio Limited, New Zealand.
Advertisement
Table of Contents
Related Manuals for Plinius Reference M-10
Summary of Contents for Plinius Reference M-10
-
Page 1: Table Of Contents
All operational, technical and descriptive material in this publication is subject to change at any time without notice. For further product information or queries, please contact your Plinius dealer. Plinius products are designed and manufactured by Plinius Audio Limited, New Zealand. -
Page 2: Introduction
We have designed and manufactured this preamplifier to reproduce your favourite music faithfully and accurately. With a little care and a full understanding of the operating recommendations in this manual, your Plinius Reference M-10 dual mono preamplifier will provide years of high-quality, trouble-free performance. -
Page 3: Unpacking
It can however still be influenced by acoustical feedback in the operating environment. The use of acoustic cones or a suitably spiked preamplifier stand or table may further enhance the performance of this preamplifier. Consult your Plinius dealer for further advice if required. -
Page 4: Care & Maintenance
From time to time you may wish to clean the surface of your Plinius equipment to remove dust, or any material build up from the atmosphere or on commonly used controls. Your Plinius product is made up of parts that have a hard anodised or a powder coat finish and will clean easily without being damaged. -
Page 5: Precautions
PLEASE TAKE SPECIAL NOTE OF THE FOLLOWING PRECAUTIONS BEFORE OPERATING YOUR NEW PREAMPLIFIER. Ǟ The Plinius Reference M-10 dual mono preamplifier contains electronic circuits that are capable of generating heat that could have an adverse effect on other electronic equipment, furniture, etc. -
Page 6: Front Panel Functions
The volume control is a motorised unit that will accurately convey the selected source signal to the line stage of the Plinius Reference M-10 dual mono preamplifi er. When using the remote control to alter the volume level, briefl y press the button to make small adjustments, or hold the button down to continuously adjust the volume. -
Page 7: Rear Panel Functions
This panel incorporates all terminals for connecting the input signals from your CD player, tuner, etc and the outputs to the mains supply. Please remember that your Plinius Reference M-10 dual mono preamplifi er is a high quality electronic instrument capable of an exceptional level of performance. Be sure that you understand your system’s requirements fully before you make any connection to this... - Page 8 This input is for use specifically with home theatre processors and AV receivers. In some circumstances you may wish to use the Plinius system as the front two channels of a surround or home theatre environment. The HT Bypass input can be used for this purpose, as any signal connected to these inputs will feed to the outputs, bypassing the volume control.
- Page 9 This connector is where the mains supply cable from your wall connects to the preamplifier. You will notice that a fuse holder is mounted within this connection, and it holds a mains fuse to provide surge and overload protection for your preamplifier. PLINIUS REFERENCE M-10...
-
Page 10: Remote Control Functions
Remote Control Functions The Plinius Reference M-10 dual mono preamplifi er features a full function remote to control all settings and confi gurations of the preamplifi er. 1. STANDBY Standby is used to put the unit into a low power mode. This disconnects the outputs of the preamplifi er and turns off the white display LED’s. -
Page 11: Installation & Operation
Connections to your Reference M-10 dual mono preamplifier should be made in the same order as they are listed in this section. DO NOT attempt to connect your Reference M-10 dual mono preamplifier until you have read and fully understood these instructions. - Page 12 All pre out outputs are live at all times except during Mute or Standby. USING LINE OUT A line level output is provided on the back of the Reference M-10 Preamplifier for connection to accessories such as recording devices, headphone amplifiers, etc. The level is fixed and carries signal of the selected input, even when the Preamplifier is muted.
- Page 13 WARM-UP PERIOD You will find that the Reference M-10 dual mono preamplifier will become noticeably ‘purer’ in sound after being on for a period of time. We usually recommend waiting at least 24 hours before expecting the best quality of sound reproduction from your preamplifier.
-
Page 14: Product Features
Product Features REMOTE CONTROL Provided with your Reference M-10 dual mono preamplifier is a 13 function remote control. Two AAA batteries power the remote, and these are replaced by removing the single screw on the base of the remote that holds the battery compartment in place. - Page 15 In the unusual event that this fuse should blow, you must first establish the cause of this failure (such as power surges, damaged mains cable, etc) before replacing the fuse with one of the same rating and type. Should the preamplifier continue to suffer mains fuse failure, contact your Plinius dealer. PLINIUS REFERENCE M-10...
-
Page 16: Troubleshooting
Refer to the Product Features section for further information. NOTE: If the unit immediately or repeatedly suffers mains fuse failure there may be a major problem and you should contact your Plinius dealer. ERROR MODE If the input signal our output signal is too large the error mode will be triggered and the input and output will mute and the power LED will flash. -
Page 17: Specifications
80W/0.3A maximum MAXIMUM INPUT VOLTAGE 7W/0.03A standby 7V RMS RCA/Unbalanced 7V RMS XLR/Balanced DIMENSIONS Height: 170mm (6.75") INPUT IMPEDANCE Width: 510mm 20") 7.5kΩ RCA/Unbalanced Depth: 480mm (19") 47kΩ XLR/Balanced Weight: 16kg (35lbs) OUTPUT IMPEDENCE 10Ω RCA/Unbalanced 20Ω XLR/Balanced PLINIUS REFERENCE M-10... -
Page 18: Index
Pre Out Output ..............8, 12 Rear Panel Layout ............7 Remote Control ...............10, 14 Remote IR Input ...............8, 14 Safety Precautions ............5 Serial Number ..............2 Source Selection Buttons ..........6 Terminations ..............11 Troubleshooting ..............16 Ventilation ................3 Volume Control ..............6, 10 Warm-Up Period ..............13 PLINIUS REFERENCE M-10... - Page 19 PLINIUS REFERENCE M-10...
- Page 20 PLINIUS REFERENCE M-10...
Need help?
Do you have a question about the Reference M-10 and is the answer not in the manual?
Questions and answers