Door Stop Adjustment; Hinge Adjustment - Viking BRTGK72SS Installation Instructions Manual

AIR DISCHARGE SIDE VIEW

DOOR STOP ADJUSTMENT

1. Remove center grill louver from the top air grill assembly.
2. Remove top air grill by removing (4) 1/4" screws with an 8"
(20.3 cm) long magnetic 1/4" (.6 cm) nut driver. Pull
assembly forward.
3. Open refrigerator door so door stop arm and shoulder
screw are accessible. Shoulder screws should be in 110
door opening position.
4. Remove shoulder screw and place shoulder screw in the
90 o or 120 o door opening position.
5. Replace to air grille assembly.

HINGE ADJUSTMENT

Verify proper door alignment. Only the top hinge is adjustable.
1. Remove the center grill louver from the top air grille
assembly.
2. Remove top air grill by removing (4) 1/4" screws with an 8"
(20.3 cm) long magnetic 1/4" (.6 cm) nut driver. Pull
assembly forward.
3. Loosen the (4) top hinge screws.
4. Align refrigerator door by lifting.
5. Tighten screws.
6. Replace top air grille assembly.
o
14