Compumatic MINIDART v3 Technical Manual page 2

© 1992-2009 COMPUMATIC NETSEARCH SOCIEDAD LIMITADA. All rights reserved.
This manual, and the software described in it, can only be reproduced under officially written license
and following the license terms. All the information in this manual is for reference only, can be changed
at any moment without authorisation and Compumatic Netsearch Sociedad Limitada takes no
responsibility for errors or wrong explanations.
Except in the case of officially written license and following the license terms, this manual, or part of it,
cannot be reproduced, kept on a computer system, kept on a mass information system, sent by
modem or network, exposed in on line services, and generally cannot be reproduced or transmitted
in any way, physical or not physical.
COMPUMATIC, NETSEARCH, TKS, OKE and QUETGLAS are COMPUMATIC NETSEARCH
SOCIEDAD LIMITADA registered trademarks.
Q
1
4
8
4
1
24
300
1
1
1
1
1
1
1
1
w w w . c o m p u m a t i c . n e t
-2-
CONTENTS OF THE PACKAGE
DESCRIPCTION
Minidart Dart Machine.
Cone Head Hex Screw m10x18mm. (Mounted)
Nuts m10. (Mounted)
∅ ∅ ∅ ∅ ∅
Pressure Washers
Hex Screw 10x20 mm. (Mounted)
Darts. (In Coin Box)
Tips. (In Coin Box)
Power Cable.
CD with the Minidart Manual in electronic form.
Minidart Machine Approval Certificate.
Power Suppy Approval Certificate.
Electromagnetic Compatibility Approval Certificate.
Security Hanger. (Mounted)
Throw Line.
Telephone Cable RJ-11
10. (Mounted)