Honeywell E-Mon IDR Series Installation Instructions Manual page 14

E-MON INTERVAL DATA RECORDER
Table 2. Modbus Customer Point Map: IDR8 and IDR16. (Continued)
Integer Float
Address Address Registers
40089 41089
40091 41091
40093 41093
40095 41095
Address Registers
1 6
44001
2 1 per interval
44007
3 2 per day
45501
4 8
46025
5 8
46049
46057 8
46513 8
46521 8
1.?To set the interval data day block, set multiple points at 44001 for 6 points with data set to 0C0I 0000 MMDD
YYYY 0000 0000. 0C = Channel, 0I = Interval (0F = 15 minute intervals, 05 = 5 minute intervals)
2. Each register represents a 15 or 5 minute pulse value based on the interval day block. 96 registers max with
15 minute intervals. 288 registers max with 5 minute intervals. The first interval data register 44007 represents
the pulse count for the first 15 or 5 minute interval beginning at midnight.
3. The interval data headers represent days with available interval data. Each day represents 2 registers.
Format: MMDD YYYY.
4. To set the date and time, set multiple points at 46025 for 4 points with data set to HHMM SSDW MMDD YYYY
(DW=day of week)
5. To change the Modbus ID, set single point at 46050 with data set to new Modbus ID (e.g. 1 to 247). Jumper J6
must be closed.
With an IDR16 each channel 1 through 16 represents the IDR16 meter jack inputs 1 through 16.
With an IDR8 each channel 1 through 8 represents the IDR8 meter jack inputs 1 through 8.
62-0394—06
Description
2 Demand Channel 13
2 Demand Channel 14
2 Demand Channel 15
2 Demand Channel 16
Table 3. Modbus Customer Point Map: IDR8 and IDR16.
Format
Custom
Integer
Custom
Custom
Custom
Custom
Custom
Custom
Integer
Units
Demand Demand * Pulse Value
Demand Demand * Pulse Value
Demand Demand * Pulse Value
Demand Demand * Pulse Value
Description
Interval Day Block
Interval Data
Interval Data Headers
RTC Date/Time
EZ7 ID, Modbus ID, Serial Number
Recorder Info., Demand Interval
Flags L1: Power Failure, Battery
Flags L2: Power Failure Date
14
Float Units IDR
R
R
R
R
IDR
R/W
R
R
R/W
R/W
R/W
R
R