Honeywell E-Mon IDR Series Installation Instructions Manual page 5

1.0 PRE-INSTALLATION INFORMATION (CONTINUED)
The IDR is available in two configurations.
1. Modular Jacks (IDR-8 and IDR-16): Supplied with all modular jacks for use only with Honeywell E-Mon
meters.
2. Plug-In Screw-Type Connectors (IDR-8): Supplied with all plug-in screw-type connectors for use with
third-party meters (electric, gas, water, etc.) that are provided with a dry contact pulse output.
MODULAR JACKS
Fig. 1. Modular Jacks.
SCREW-TYPE
CONNECTORS
Fig. 2. Plug-In Screw-Type Connectors.
5
E-MON INTERVAL DATA RECORDER
M33954
M33955
62-0394—06