Threading; Balance Of Thread Tension; Adjustment Of Stitch Length And Reverse Sewing; Adjustment Of Thread Tension - HIGHLEAD GC24699 Instruction Manual Parts Catalog

Length of wound thread:Loosen the thread lenghth adjusting screw to increase length of the thread and tighten
the screw to decrease length of thread.
6. THREADING(Fig.6,Fig.7)
（1）Pass each thread through thread
guide A.
Note:When thin slippery thread(polyster
thread) is used pass the thread through
thread guide B as show in Fig.7.
（2）Thread take-up lever to the
highest position,pass each thread in the
order in Fig.6.
Note:Pressing the tension releasing button ,the thread can be pulled out easily.
7. BALANCE OF THREAD TENSION(Fig.8)
8. ADJUSTMENT OF STITCH LENGTH AND REVERSE SEWING(Fig.9)
Rotate the stitch length adjusting dial to change the stitch length.
When press the feed reversing lever, reverse sewing will take place.Loose the lever, reverse sewing will
disappear.
9. ADJUSTMENT OF THREAD TENSION(Fig.10)
Needle thread tension should be adjusted in refence to bobbin thread tension.
— 3 —