Technical Information - Bogen CAM8 Installation And Use Manual

Technical Information

SPECIFICATIONS
Signal-to-Noise
MIC Pre-amp Equivalent Input Noise
Maximum Voltage Gain
Frequency Response
Crosstalk (adjacent channels)
Phantom Power
INPUTS 1-8
Input Impedance
Nominal Source Impedance
Line Pad
Input Gain/Trim Range
Nominal Level (input trim pot mid-range)
Minimum Level (input trim pot max gain)
Maximum Level (input trim pot min gain
plus +20 dB headroom)
AUXILIARY INPUT
Input Impedance
Nominal Input Level
OUTPUTS
Output Impedance
Nominal Load Impedance
Nominal Level
Maximum Level
Main Output MIC Pad
Ref +26 dBV @ 54 dB sys gain = 90 dB
-129 dB @ 150 ohm, 20 Hz to 20 kHz
96 dB
± 1 dB from 20 Hz to 20 kHz
+0, -3 dB from 10 Hz to 30 kHz
better than -90 dB
+30V DC
3.5k ohm Mic
15k ohm Line
150 ohm
-50 dB
40 dB
-50 dBµ line pad off
0 dBµ line pad on
-70 dBµ line pad off
-20 dBµ line pad on
-30 dBµ line pad off
+20 dBµ line pad on
20k ohm balanced
0 dBm
220 ohm unbalanced, 440 ohm balanced
>600 ohm
+4 dBµ RMS
+26 dBµ RMS Balanced
-50 dB
Page 26 of 32