Special Features Activation - Bogen CAM8 Installation And Use Manual

Special Features Activation

The CAM8-Series mixers have several built-in features which are easily activated by making
adjustments inside the mixer chassis. Changing the selection of all built-in features requires
only the correct placement of internal jumpers or varying the settings of an internal poten-
tiometer.
Note:All the internal components — jumpers and potentiometers — to which adjustments
are needed for built-in features are highlighted within dashed areas in the drawing below.
Warning: Adjustments made to any other internal components may void the warranty.
AUX IN
AUX IN
REAR
J17
J18
RIGHT
LEFT
FRONT
METER RESPONSE
PEAK
J20 J21
OUTPUT
LIMITER
SWITCH
MAIN OUT
MAIN BUS
AUX BUS
MAIN
BUS
AVG
+
LED BAR GRAPH METER
MAIN
OUTPUT
VOLUME
KNOB
Page 18 of 32
AUX OUT POWER
METER SOURCE
AUX
BUS
J22 J23
AUX SOURCE
J1 INT
J2 EXT
AUX
PREGAIN
POT
-
RP23
AUX
OUTPUT
VOLUME
KNOB
Power
Switch
Button