Helpful Hints - Bogen CAM8 Installation And Use Manual

Helpful Hints

Electrical equipment operates best in a clean, dry, well-ventilated environment free of vibra-
tion and electromagnetic fields. The following are some guidelines to achieve optimal per-
formance.
Avoid placing the mixer and cables near heat sources. Be particularly aware of other audio
equipment, such as amplifiers, which can produce a great deal of heat when operating.
To minimize hum in the system, avoid placing the mixer and cables near radio frequency
devices and other electromagnetic field sources such as:
• Fluorescent lights
• Electrical motors
• SCR dimmers
• AC power lines, etc.
Note: Always use 2-conductor shielded cable to reduce EMI or RF interference to the
Line/MIC inputs.
Keep the mixer and other equipment clean and free of dust by wiping occasionally with a soft,
damp cloth.
Protect the mixer from electrical damage by disconnecting it from the power source when-
ever it will be unused for a week or longer.
The Bogen mixer is easy to install and adjust. The only tools needed are:
1. Slotted screwdriver
2. Phillips-head screwdriver
Page 10 of 32