Table of Contents
Advertisement
"Warning! When using electric tools basic safety precaution should always be followed to reduce
the risk of fore, electric shock and personal injury, including the following.
Read all these instructions before attempting to operate this product and save these instructions."
1. Keep work area clear
-Cluttered areas and benches invite injuries.
2. Consider work area environment
-Do not expose tools to rain.
-Do not use tools in damp or wet locations.
-Keep work area well lit.
-Do not use tools in the presence of flammable liquids or gases.
3. Guard against electric shock
-Avoid body contact with earthed or grounded surfaces.
-Make certain the machine is properly grounded.
4. Keep other persons away
-Do not let persons, especially children, not involved in the work touch the tool or the extension
cord and keep them away from the work area.
5. Store idle tools
-When not in use, tools should be stored in a dry locked-up place, out of reach of children.
6. Do not force the tool
-It will do the job better and safer at the rate for which it was intended.
7. Use the right tool
-Do not force small tools to do the job of a heavy-duty tool.
-Do not use tools for purposes not intended; for example do not use circular saws to cut tree
limbs or logs.
8. Dress property
-Do not wear loose clothing or jeweler; they can be caught in moving pans.
-Non-skid footwear is recommended when working outdoors.
-Wear protective hair covering to contain long hair.
9. Use protective equipment
-Use approved safety glasses/face shields while using this machine.
-Use face or dust mask if cutting operations create dust.
10. Connect dust extraction equipment
-If device are provided for the connection of dust extraction and collecting equipment, ensure
these are connected and properly used.
11. Do not abuse the cord
-Never yank the cord to disconnect it from the socket. Keep the cord away from heat, oil and
sharp edges.
SAFETY RULES
Advertisement
Table of Contents
