Advertisement
Table of Contents
Model #
381W
Rustic Extension
Table
Congratulations!
This fine piece of furniture will make a handsome
addition to your home. For the best results, start by
reading both the Assembly Instructions and
Finishing Hints before you begin your project.
For normal household use only.
recommended for commercial use.
Do not climb, sit or stand on this piece of
furniture.
Natural characteristics
such as knots provide a
natural feel.
P.O. Box 2827
Eugene, OR 97402 USA
Service Policy:
which are defective, missing or damaged
during assembly. Please contact Whittier
Wood Products customer service department
directly (by phone, fax, mail or email) for
replacement parts.
Hours:
Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order:
Provide the complete furniture
model number (upper left corner of this
page), part letter, production code, quantity
needed, reason for replacement and your full
name and address along with a telephone
number in case we need to contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
Outside U.S. or Canada: 541-687-0213
Fax: 541-687-2060 • Email: info@whittierwood.com
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Read both the Assembly Instructions and Finishing
Hints completely before beginning.
Store the parts: 1) in their box; 2) in a dry place; 3) in
temperatures ranging from 40° to 90°. (Not on a cold,
possibly damp, cement floor.)
Inspect your furniture periodically for any loose glue
joints or screws, or any other problem which may
be affecting the stability of your furniture. Tighten or
repair as needed.
Production Code:
We will replace any parts
10/05
Advertisement
Table of Contents
Related Manuals for Whittier Wood John Greenleaf 381W
Summary of Contents for Whittier Wood John Greenleaf 381W
- Page 1 Model # 381W Rustic Extension Table Service Policy: We will replace any parts which are defective, missing or damaged Assembly Instructions during assembly. Please contact Whittier Wood Products customer service department directly (by phone, fax, mail or email) for replacement parts. Hours: Our friendly customer service staff can be reached Monday-Friday 7:00 a.m.
- Page 2 381W Rustic Extension Table — Parts List BEFORE BEGINNING ASSEMBLY, check that the quantities of the parts received match those on the parts list below. C — Lower End A — Left Leg B — Right Leg F — Middle D —...
- Page 3 381W Rustic Extension Table ASSEMBLY INSTRUCTIONS TOOLS REQUIRED: Phillips Head Screwdriver, Mallet or Padded Hammer, Wood Glue, Tape Measure WE RECOMMEND FINISHING THE UNIT BEFORE FINAL ASSEMBLY. Before finishing, read enclosed finishing hints. To test for desired color apply stain to the Middle Apron (F). See Figure 4. FIG.
- Page 4 Mortise Hole 1/2" END VIEW FIG. 3B FIG. 3A 3. For added strength, insert a Screw (I) through the back side of the Lower End Apron (C) (the side with the remaining mortise holes in the legs) into each leg (A & B). See FIGURE 3A. Start the screw in the corner and at an angle so that it will not go through the other side of the leg.
- Page 5 1/2" FIG. 6 x 12 FIG. 5 Mortise Holes 5. Take one leg assembly and apply a thin layer of glue to the elongated mortise holes. Slide the leg assembly onto the table top assembly so that the tenons in the Front/Back Aprons (E5) seat into the mortise holes in the two legs.
- Page 6 x 12 FIG. 9 Mortise Holes 9. Take the other leg assembly and apply a thin layer of glue to the elongated mortise holes. Slide the leg assembly onto the table top assembly so that the tenons in the Front/Back Aprons (E5) seat into the mortise holes in the two legs.
Need help?
Do you have a question about the John Greenleaf 381W and is the answer not in the manual?
Questions and answers