Connecting With Wireless Direct - Canon TR150 Series Online Manual

Connecting with Wireless Direct

You can connect devices (e.g. computer, smartphone, or tablet) to the printer by two methods below.
• Wireless connection (connecting devices via a wireless router)
• Direct wireless connection (connecting devices using Wireless Direct)
This section describes Wireless Direct, which allows you to print by connecting the devices to the printer
directly.
Follow the procedure below to set up and use Wireless Direct.
1. Preparing the printer.
Changing Printer Setting to Use Wireless Direct
2. Preparing a device to connect to the printer.
Changing Settings of a Device and Connecting It to the Printer
Important
• You can connect up to 5 devices to the printer at the same time with Wireless Direct.
• Check the usage restrictions and switch the printer to the Wireless Direct.
Restrictions
Changing Printer Setting to Use Wireless Direct
1. Make sure the printer is turned on.
Power Supply
2. Select
3. Select LAN settings and then press the OK button.
4. Select Wireless Direct and then press the OK button.
5. Select Advanced mode and then press the OK button.
6. Check displayed message and then press the OK button.
7. Select ON and then press the OK button.
The Wireless Direct is enabled and a device can be connected to the printer wirelessly.
Note
• To show the password, select ON. To hide the password, select OFF.
• The password is required when connecting a device to the printer. Depending on the device you
are using, no password is required.
(Setup) on HOME screen and then press the OK button.
41