Canon TR150 Series Online Manual page 43

Changing Wireless Direct Setting
Change the settings for the Wireless Direct following the procedure below.
1. Make sure the printer is turned on.
Power Supply
2. Select (Setup) on HOME screen and then press the OK button.
3. Select LAN settings and then press the OK button.
4. Select Wireless Direct and then press the OK button.
5. Select a setting item and then press the OK button.
• Show setting info
A confirmation screen is displayed whether you want to display password information.
When you select ON or OFF, the setting values for using the printer with Wireless Direct are
displayed.
Devices detect the printer by Network (SSID)/device name shown on the screen.
• Change network name (SSID)
Change the identifier (SSID) for Wireless Direct.
The identifier (SSID) is the printer's name (device name) displayed on a Wi-Fi Direct compatible
device.
Follow the procedure below to change the identifier (SSID).
◦ To set manually
1. Select Change manually.
2. Check displayed message and select Next.
3. Enter the identifier or printer name.
4. Confirm the inputted content and select OK.
◦ To set automatically
1. Select Auto update.
2. Select Yes.
43