Canon TR150 Series Online Manual page 219

Select the link below to download IJ Network Device Setup Utility and install it.
Checking Printer Connection Status Using IJ Network Device Setup Utility
See below for starting up IJ Network Device Setup Utility.
For Windows:
Starting Up IJ Network Device Setup Utility
For macOS:
Starting Up IJ Network Device Setup Utility
Make sure the computer is connected to the wireless router.
Check7
For more on how to check the computer settings or connection status, see your computer instruction manual or
contact its manufacturer.
Note
• If you use a smartphone or tablet, make sure the Wi-Fi is enabled on the device.
Make sure Enable bidirectional support is selected in the Ports sheet of the
Check8
Printer properties dialog box. (Windows)
If not, select it to enable bidirectional support.
Make sure security software's firewall is off.
Check9
If your security software's firewall is on, a message may appear warning you that Canon software is attempting
to access the network. If this warning message appears, set security software to always allow access.
If you are using any programs that switch between network environments, check their settings.
If printer is connected to an AirPort Base Station via LAN, make sure you use
Check10
alphanumeric characters for network name (SSID). (macOS)
Make sure of the default printer in the Control Panel. (Windows)
Check11
Select Devices and Printers in the Control Panel and make sure that your printer is marked as default. If it is
not marked, set it as the default printer.
If the problem is not resolved, click here and redo setup.
219