Table of Contents
Advertisement
ACTIVATING/DEACTIVATING COOKING ZONES AND ADJUSTING
POWER
To activate the cooking zones:
1.
Switch on the hob.
2.
Place the pot in the chosen cooking zone, ensuring that it is covering
one or more of the reference points on the surface of the hob.
3.
Select the cooking zone or flexible area from the left-hand display.
4.
Set the desired power level by pressing or moving your finger
horizontally across the slide touchscreen.
The power level set will appear in the pane of the cooking zone selected.
Each cooking zone offers a range of different heat settings, from "1"
(minimum power) to "18" (maximum power).
Using the slide touchscreen, you can also select the quick heat function,
which will appear on the display with the letter "P".
Please note: If the pot is not suitable for induction cooking, is not positioned
correctly or is not of an appropriate size, the cooking zone pane will flash. If
no pot is detected within 30 seconds of making the selection, the cooking
zone switches off.
To deactivate the cooking zones:
Select the cooking zone in the left-hand display and press the "OFF"
button at the top of the slide touchscreen. If the cooking zone is still hot,
the residual heat indicator "H" will appear in the corresponding pane.
PLACE A POT
When using a cooking area composed of several zones, the pot can
be placed anywhere on the active area. The hob will automatically
recognise the actual positioning of the pot.
If you wish to add an additional pot to the active cooking area, use the
"Place a pot"
command to allow the hob to detect the new pot.
KEY LOCK
To prevent accidental activation of the hob during cleaning, or to
prevent the controls from being changed accidentally whilst cooking,
press the "Key lock"
button for 3 seconds: a beep and a warning light
indicate that this function has been activated.
The control panel will be locked, with the exception of the off button.
To reactivate the controls, press the "Key Lock"
seconds. The warning light switches off and the hob is active again.
TIMER
When the hob is off, you can use the right-hand display as a timer.
To activate the timer:
1.
Switch on the hob.
2.
Press the hourglass icon
display.
3.
Use the +/- buttons to set the time.
4.
When the set time has elapsed, an acoustic signal sounds.
To change or deactivate the timer:
1.
Press the hourglass icon
display.
2.
Use the + and - buttons to reset the desired time, or press the
"STOP" button to turn off the timer.
SETTING THE COOKING TIME
The cooking zones can be programmed to switch off automatically.
To set the cooking time:
1.
Select the cooking zone and set the required power level.
2.
Press the stopwatch icon
display.
3.
Use the +/- buttons to set the time.
4.
Once the set time has elapsed, an acoustic signal sounds and the
cooking zone switches off automatically.
To change or deactivate the cooking timer:
1.
Select the active cooking zone
2.
Press the stopwatch icon
display.
3.
Use the + and - buttons to reset the desired time, or press the
"STOP" button to cancel the set cooking time.
A cooking time can be set for each zone or flexible area by following the
same steps.
RESIDUAL HEAT INDICATOR
When the letter "H" appears in one of the cooking zone selection display
panes, this means that the corresponding cooking zone is still hot. When
the cooking zone has cooled, the "H" disappears.
button again for 3
that appears on the manage functions
that appears on the manage functions
that appears on the manage functions
that appears on the manage functions
EN
Advertisement
Table of Contents
