Table of Contents
Advertisement
CHEF CONTROL
This function divides the hob into four cooking zones, activating these
simultaneously at a pre-set power level. It allows you to move pots
from one area to another, to allow you to continue cooking at different
temperatures.
To activate the Chef Control function:
1.
Place the pot in position.
2.
Press the 6
th
Sense button.
3.
Select "Chef Control" from the manage functions display and
confirm.
6TH SENSE MENU
Chef Control
4.
The four cooking zone panes appear on the left-hand display, with
the corresponding power level (low, medium, high).
5.
If you wish to add more pots, use the "Place a pot" command.
6.
To exit this function, press "STOP".
CHEF CONTROL
Place a pot
To change the power of a cooking zone:
1.
Select cooking zone.
2.
Select the desired power level by dragging your finger across the
slide touchscreen, which will remain visible for 30 seconds.
3.
The word corresponding to the power level selected (low, medium,
high) reappears.
Please note: The changed settings are saved until you change them again
or reset them.
MAINTENANCE AND CLEANING
WARNING
•
Do not use steam cleaning equipment.
•
Before cleaning, make sure the cooking zones are switched off and that the residual heat indicator ("H") is not
displayed.
Important:
•
Do not use abrasive sponges or scouring pads as they may damage
the glass.
•
After each use, clean the hob (when it is cool) to remove any
deposits and stains from food residue.
•
Sugar or foods with a high sugar content can damage the hob and
must be immediately removed.
•
Salt, sugar and sand could scratch the glass surface.
•
Use a soft cloth, absorbent kitchen paper or a special hob cleaner
(follow the Manufacturer's instructions).
•
Spills of liquid in the cooking zones can cause the pots to move or
vibrate.
•
After cleaning the hob, dry thoroughly.
SOUNDS PRODUCED DURING OPERATION
Hobs may produce noises during normal operation.
During the pot recognition phase, the hob produces a click sound, while
during cooking, hissing or crackling sounds may be heard. Hisses and
crackles actually come from the pots, and are produced by specific
FLEXIFULL
This function allows you to use the entire hob as a single cooking area.
To activate the Flexifull function:
1.
Place the pot in position.
th
2.
Press the 6
Sense button.
3.
Select "Flexifull" from the manage functions display and confirm.
6TH SENSE MENU
Flexifull
4.
Set the desired power level from the slide touchscreen. The power
level set appears on the left-hand display.
5.
If you wish to add more pots, use the "Place a pot" command.
6.
To exit this function, press "STOP".
FLEXIFULL
Place a pot
If the iXelium ™ logo appears on the glass, the hob has been treated
with iXelium ™ technology, an exclusive Whirlpool finish which ensures
perfect cleaning results, as well as keeping the surface of the hob shiny
for longer.
To clean iXelium ™ hobs, follow these recommendations:
•
Use a soft cloth (microfibre is best) dampened with water or with
everyday glass cleaning detergent.
•
For best results, leave a wet cloth on the glass hob surface for a few
minutes.
features of the base of the pot being used (for example, when a base is
made from several layers of material, or is irregular). These noises may
vary depending on the accessories used and the amount of food that
these contain, and do not indicate any type of defect.
Advertisement
Table of Contents
