Basic Settings - Cobra 63890 Owner's Manual & Safety Instructions

Basic Settings

Date, time, Language, and Menu
System > General
1. Date and time:
a. Date: Click calendar icon, select current date.
b. time: Enter current time.
c. Date Format: MM/DD/yy is selected by
default. Change to other format if desired.
d. time Format: 24Hour is selected
by default. Change to 12Hour if
desired, then select aM or PM.
Daylight Saving time
System > General > DSt
Page 12 For technical questions, please call 1-888-866-5797.
2. Language: English is selected by
default. Change if desired.
Click Save, then right-click on screen. Open
Main Menu and language choice will be set.
Note: If using Startup Wizard, do not follow this step.
3. Video Format: Default is NtSC,
which is the standard in the United
States. LEaVE It SEt tO NtSC.
4. Menu timeouts: Select how long menus
will display or set to OFF so menus will
always display until you close them.
5. Show Wizard: Uncheck to stop Setup
Wizard from running upon start up.
Note: If using Startup Wizard, this
check box is not available.
Changes will be saved when you click Save.
Changes will not be saved if you click
Cancel or right click on screen.
Click Default to restore default settings.
1. DSt: Disable is selected by default.
Change to Enable to manually enter
when time change will happen.
2. time Offset: 1Hour is selected by
default. Change to 2Hour if necessary.
3. Daylight Saving time: Week is selected
by default. Change to Date if desired.
4. Start time: Set date and time for change to occur.
5. End time: Set date and time for change to end.
Changes will be saved when you click Save.
Changes will not be saved if you click
Cancel or right click on screen.
Click Default to restore default settings.
Item 63890