Okayo CAM-9T Manual page 19

WIRELESS ENG / EFP SYSTEM
Transmitter
1. Press and hold both set and power buttons simultaneously
to turn the transmitter on.
2. "Setting" mode will be entered successfully for custom
adjustments.
3. Press or button to scroll options. See setting menu
 
below..
 Quality
 RF power
 Mic gain
 Exit
4. Press the set button again to confirm the selection and leave
the setting..
5. To leave the SETTING mode, find "EXIT" on the menu and
press the set button.
This refers to sound quality of the receiver.
 HQ: Higher
 Q (default): Regular
Note: Only HQ is available in 902~928MHz.
Power definition will vary upon countries.
Hi: Operation range will be greater.

Lo (default): Operation range will be shorter.

1~16 dB (Default: 8 dB)

-
15