WIRELESS ENG / EFP SYSTEM
Adjusting settings
(SETTING mode)
Receiver
1. Press and hold both set and power buttons simultaneously
to turn the receiver module on.
2. "Setting" mode will be entered successfully for custom
adjustments.
3. Press
or
button to scroll options. See setting menu
below..
Quality
Squelch
Output level
Channel output
Receiver mode
Exit
4. Press the set button again to confirm the selection and leave
the setting..
5. To leave the SETTING mode, find "EXIT" on the menu and
press the set button.
This refers to sound quality of the receiver.
HQ: Higher
Q (default): Regular
Note: Only HQ is available in 902~928MHz.
This refers to signal quality of the receiver. The better the
signal quality, the shorter the operation range.
Hi: Operation range will be shorter.
Lo (default): Operation range will be greater.
LINE (default)
MIC
A+B (default): Both transmitter A and B will be heard.
A/B: Either transmitter A or B will be heard.
Dual Rx (default)
Single Rx
-
14