Connecting Correctly To Camera Or Recording; Powering Off - Okayo CAM-9T Manual

WIRELESS ENG / EFP SYSTEM
3. Default mic gain Mid shows up. Press
define preferred level. Press the power button to confirm
and leave the setting of MIC GAIN.
4. To leave the "setting" mode, press
"EXIT" and press the power button again.
!
Connecting
correctly to
camera or
recording device
!

Powering off

Charging via a
micro-USB cable
!
Kindly note listening at high volume for long periods may damage
your hearing.
Receiver
1. Mount the receiver on the camera or recording device via
shoe adapter SM-9.
2. Connect supplied 1/8"to XLR or 1/8" to 1/8" cable (upon
preference) to camera or recording device.
3. Connect headphone with the phone jack on the receiver.
Transmitter
Connect supplied lapel microphone with the phone jack on the
transmitter.
Make sure both receiver and transmitter are at same
channel for correct communication.
Press and hold the power button for 2 seconds to turn the
device off.
Device will be off automatically when being connected with a
micro-USB cable for battery charging.
The micro-USB cable will not be a charging but a power-supply
cable if device is manually turned on afterwards.
or button to
 
or button to find
 
11