Setting The Presentation Timer - ViewSonic VS13645 User Manual

Setting the presentation timer

The presentation timer can indicate the presentation time on the screen to help you
achieve better time management when giving presentations. Follow these steps to
utilize this function:
1. Go to the Setting > Presentation Timer menu and press ENTER on the projector
or Enter on the remote control to display the Presentation Timer page.
2. Highlight Timer Period and decide the timer period by pressing
length of time can be set from 1 to 240 minutes in 1-minute increments.
Important
If the timer is already on, the timer will restart whenever the Timer Period is
reset.
3. Press to highlight Display Timer and choose if you want the timer to show up
on the screen by pressing
Selection
Always
1 Min/2 Min/3 Min Displays the timer on screen in the last 1/2/3 minute(s).
Never
4. Press to highlight Timer Position and set the timer position by pressing
.
Top-Left Bottom-Left
Press to highlight Timer Counting Direction and select your
5.
desired counting direction by pressing
Selection
Count Up
Count Down
6. To activate the presentation timer, highlight Presentation Timer and press
to select On and press ENTER on the projector or Enter on the remote
control.
To cancel the timer, perform the following steps:
1. Go to the Setting > Presentation Timer > Presentation Timer menu and
highlight Off.
ViewSonic Pro8500
/ .
Description
Displays the timer on screen throughout the presentation
time.
Hides the timer throughout the presentation time.
Top-Right
Description
Increases from 0 to the preset time.
Decrease from the preset time to 0.
Bottom-Right
/
.
/ . The
/
/
27