ViewSonic VS13645 User Manual page 39

Screen Capture Delete: Delete the captured projection screen.
Closed Caption
Enable or disable closed captions by selecting CC1 (closed caption1, the most common
channel), CC2, CC3, CC4, T1, T2 or OFF.
Green Mode
Enable this function when power consumption is under 1W.
DC 12V
1. When Green Mode is off and the projector is under standby mode, you can enable or
disable to trigger external devices such as anelectric screen.
2. When Green Mode is on and the projector is under standby mode, DC 12V will not trigger
the screen no matter you set to on or off.
3. When the projector is under normal projection, DC 12V will always trigger the screen no
matter you set to on or off.
Others
Allow you to enter the Others menu.
Zoom: Zoom in and out the images.
DCR (Dynamic Contrast Ratio): Enable DCR will further enhance contrast ratio
by darkening the black scenes. Disable DCR will resume to normal contrast
performance. DCR will impact lamp life and system noise performance.
Message: Enable or disable the message box at the right bottom of the screen.
Function
Allow user to define a short cut key on the remote control, and the function item is selected
in OSD menu.
Test Pattern
Display embedded test pattern.
Quick Power On
On: The projector will turn on in 3 seconds.
Off: The projector will turn on following normal power on procedure.
Quick Cooling
On: The projector will directly shut down without cooling procedure.
Off: The projector will shut down following normal cooling procedure.
Network
Wired LAN
Allow you to configure the wired LAN settings.
Status: Display the projector's status.
DHCP: Abbreviation for Dynamic Host Configuration Protocol. This protocol
ViewSonic Pro8500 35