NEC ITK-32TGCG-1 Quick Start Manual page 15

To pickup a call from any station (Any Call Pickup):
From any phone, dial *96, to answer a call of any ringing station, or
•
select the Call Pickup "Any company call" (programmed previously
via Control Panel).
CONFERENCE
To conference a call:
While on a call, press the "Conf" soft key or press the "Transfer"
•
soft key.
Use the keypad to dial the telephone number of the party to be
•
joined to the conference.
Press the "Dial" soft key to initiate the call, or wait a few seconds
•
for the call to be automatically dialed.
If you decide not to complete the conference, then the call can be
•
terminated by pressing the "EndCall" soft key.
If you want to switch between each party before the conference is
•
established, you can use the "Shuttle" soft key.
You can complete the conference by pressing the "Conf" soft key.
•
Hang up while conferencing:
If you are establishing a conference call and want to hang up on the
•
person you are calling, press the "EndCall" soft key.
While the phone for the third party is still ringing, the other two parties
•
are connected in a blind transfer call.
If you hang up the telephone handset or press the "Speaker" key.
•
14