Advertisement
Quick Links
Installation Instruction
Carefully open the carton, remove contents and lay out on cardboard or other
!
protective surface to avoid damage.
Check package contents against the Supplied Parts List in the next page to assure
!
that all components were received undamaged. Do not use damaged or defective
parts.
Carefully read all instructions before attempting installation.
!
IMPORTANT SAFETY INFORMATION
Install and operate this device with care. Please read this instruction before
!
installation, and carefully follow all instructions contained herein. Use proper safety
equipment during installation.
Please call a qualified installation contractor for help if you don't understand these
!
directions or have any doubts about the safety of the installation.
Do not use this product for any purpose or in any configuration not explicitly specified
in this instruction. We hereby disclaims any and all liability for injury or damage
arising from incorrect assembly, incorrect mounting, or incorrect use of this product.
UNPACKING INSTRUCTIONS
Fits most monitor size: 13"-27"
Load weight: 3.3~15.4 lbs (1.5~7 kg)
VESA: 75 x 75 and 100 x 100
1
English
Advertisement
Related Manuals for Display Mount Pro GS-002-WALL
Summary of Contents for Display Mount Pro GS-002-WALL
- Page 1 English Installation Instruction Fits most monitor size: 13"-27" Load weight: 3.3~15.4 lbs (1.5~7 kg) VESA: 75 x 75 and 100 x 100 UNPACKING INSTRUCTIONS Carefully open the carton, remove contents and lay out on cardboard or other protective surface to avoid damage. Check package contents against the Supplied Parts List in the next page to assure that all components were received undamaged.
- Page 2 Supplied Par ts List (4) M8x50 (2) Arm Set-a (4) M6x60 Lag Bolt-b Concrete Anchor-c (8)M4x12 (1)Wall Plate-d (4)M6x8 Bolt-e Thumb Bolt-f (8)M4x30 Bolt-g (8)M4 Spacer-h (1)Allen Key-i (4)Bolt Cover-j...
- Page 3 Mounting the Wall Plate to the Wall Step 1 Brick Mount 60mm 50mm Wood Mount 60mm 3.8mm...
- Page 4 Attaching the Arm Sets to Wall Plate Step 2 Removing the Security Nut and Taking Down the VESA Plate Step 3 Security Nut...
- Page 5 Step 4 Attaching the VESA Plate to the Monitor For Monitor with Flat Back For Monitor with Curved or Recessed Back Step 5 Sliding the Monitor onto the Head of Arm Set Security Nut Slide the monitor onto the head of Install the Security Nut.
- Page 6 Setting the Tilt Angle Position Step 6 Adjusting the Torque of Gas Spring Step 7 Adjust the torque of gas spring according to the weight of your monitor. If your monitor can not stay in the lower position, turn the grub screw clockwise(-). If your monitor can not stay in the higher position, turn the grub screw counterclockwise(+).
- Page 7 Managing the AV Cables Step 8 Technical Drawing Finish...
Need help?
Do you have a question about the GS-002-WALL and is the answer not in the manual?
Questions and answers