What Is Included In The Box; Attaching The Stand; Getting Started - Initial Set Up; Tv Control Stick - Blaupunkt BN24H1012EEB User Manual

What is included in the box

Supply of this TV includes following parts:
• 1x TV
• 1x Remote control
• 2x AAA batteries

Attaching the Stand

Please follow the instructions on last page of this user manual.

Getting started - initial set up

1.
Insert the batteries supplied into the Remote control.
2.
Using the RF cable supplied, connect the TV to the TV Aerial wall
socket.
3.
Connect the power cable to the Electrical outlet and switch the TV on
by using the standby button on the TV.
4. After turning the TV on, you will be welcomed by the First Time
Installation menu.
If it does not appear, on the remote control, please press [MENU] then
8-8-8-8 and the menu will appear.
If you wish to make changes to any of the default settings, use the
scroll ▲/▼/◄/► buttons. To exit this menu at anytime, press [EXIT]
button.
5. Please set desired settings in FIRST TIME INSTALLATION screen.
DVB Antenna - You can choose between Terrestrial (DVB-T), Cable
(DVB-C) or Satellite (DVB-S)*.
Language - Set the TV Menu language.
Auto Tuning - Choose if you want to tune only Digital (DTV) Analogue
(ATV) or both Digital and Analogue (DTV + ATV)
- Country - Set the desired country.
Environment - Select the location of TV.
For home use, please select Home Mode.
For shop demonstration mode, set Store Mode.
Sorting by LCN - Set LCN to ON if you want to arrange channels by
provider preferences (only applies to DVB-T and DVB-C channels).
6. Press [OK] button to start the tuning process.
7. Optional channel presets DVB-C:
Keep all default settings as recommended.
If DVB-C channels are not found, contact your network provider for the
valid "Network ID". Then perform a new search. Press the [MENU], select
"Network ID" and enter the network ID.
8. Optional channel presets DVB-S2*: Select "Satellite" in the "DVB
Antenna" in the menu for the optional channel presets. Here you can
choose between the various satellites. Since selection completed, then
the channel list of the exact satellite will be available to be imported
into your TV system.
Confirm with [OK] button on the remote control, to start scanning.
TIP: If you are missing channels, the reason for this is likely to be signal
strength, you should consider connecting signal booster and re-tuning the TV.
* - Available only for TVs with DVB-S tuner

Remote control

Refer to remote control picture on the second page of this user
manual.
1. STANDBY – Switch on TV when in standby or vice versa.
2. MUTE – Mute the sound or vice versa.
• 1x User guide
• 1x TV stand installation packet
• 3x Warranty card
3. DTV – Switch to digital TV source.
4. RADIO – Switch to Digital and switch between TV and radio in Digital
mode.
5. USB – Switch to USB source.
6. 0 – 9 – to select a TV channel directly.
7. TV GUIDE – Opens the 7 Day TV Guide (Digital mode).
8. – To return to the previous channel viewed.
VOL ▲/▼ – To increase / decrease the sound level.
9.
10. S.MODE – Scrolls through sound mode options.
11. P.MODE – Scrolls through picture mode options.
12. FAV – To display favourites menu.
13. CH ▲/▼ – To change the channel being watched.
14. (▲/▼/◄/►/ OK) – Allows you to navigate the on-screen menus and
adjust the system settings to your preference. While watching TV,
press OK to show Channel list.
15. MENU – To display OSD menu.
16. EXIT – To exit all menus.
17. SOURCE – To display the input/source menu.
18. INFO – To display the programme information.
19. ASPECT – To switch the screen between the different picture formats.
20. SLEEP – Press repeatedly to cycle through the sleep options.
21. AUDIO – To change the audio language (if available).
22. SUBTITLE – To switch the dialogue at the bottom of the screen (on/
off ).
23. TEXT – Teletext mode - To enter Teletext
24. TEXT HOLD – Teletext mode - Hold current page which is displayed
25. TEXT/DVD/ZOOM – Teletext mode - to zoom in
26. – To restart the current chapter
27. – To advance forward to the next chapter
28. – To stop the playback / To EJECT the disc press/hold the button
/
for 4 seconds.
29. – To play in fast rewind mode.
30. – To play in fast forward mode.
31. – To play/pause
32. COLOUR BUTTONS – Additional teletext and OSD functions

TV Control Stick

TV control stick is located on the lower left corner of back side of the TV.
You can use it instead of remote control to control most of the functions
of your TV.
While TV is in standby mode:
• short press of control stick - Power On
While watching TV:
• RIGHT/LEFT – volume up/volume down
• UP/DOWN – changes channel up/down
• short press – Displays Menu/source/Power/Exit
While in menu:
• RIGHT/LEFT/UP/DOWN – navigation of cursor in on-screen menus
• short press – OK/Confirm selected item
• long press – Back to previous menu
Choosing Mode Input/Source
To switch between the different input/connections.
a) Using the buttons on the remote control:
1. Press [SOURCE/ ] - The source menu will appear.
2. Press [▼] or [▲] to select the input you require.
3. Press [OK].
b) Using the TV control stick:
1. By short press of control stick to enter.
2. Move rocker [◄] to select the source.
3. Press OK
EN