Reading The Display - INSIGHT Driver Information Center User Manual

Reading the Display

The Driver Information Center display has upper and lower lines. The
lines normally function independently of each other allowing two different
parameters to be displayed at once.
HOLD TO
EXPAND
HOLD TO
EXPAND
In the diagram above, the top line displays Engine Oil Pressure while the
bottom line displays Coolant Temperature. Either line could be changed
to display a different parameter without affecting the other line of the
display. Some Driver Information Center functions require that both lines
be used to display one screen. For example, if the Upper Expand key is
pressed and held for longer than two seconds, the abbreviated text of the
upper line will be expanded, resulting in the display below. This two line
screen will be shown for four seconds before the previous screen returns.
The Trips Setup menu in the diagram below is another example of a
two line display.
All the instructions in this manual refer to the top display line. The bottom
display line functions in exactly the same manner as the top.
HOLD TO
EXPAND
HOLD TO
EXPAND
HOLD TO
EXPAND
HOLD TO
EXPAND
Upper display
HOLD TO SET
HOLD TO SET
Lower display
HOLD TO SET
HOLD TO SET
HOLD TO SET
HOLD TO SET
Reading the Display
line
line
7