To Start, Stop Or Reset An Individual Trip - INSIGHT Driver Information Center User Manual

To Start, Stop or Reset an Individual Trip:

Select the desired Trip using the Trips Setup screen described in the
previous section.
Then to Start, Stop or Reset that Trip:
Until:
Reset the
Trip
HOLD TO
EXPAND
This screen allows the user to start, stop or reset the Trip. Pressing the
"START" key starts the Trip, the "STOP" key stops the Trip or the "RESET"
key resets the trip. If a Trip is running when it is reset, it will keep running
with all the data set to zero. This screen remains displayed for up to eight
seconds if no keys are pressed, then the display returns to the Trip data
with no changes made.
An * will appear to the right of the Trip number if the Trip is running.
Press and Hold
This message is displayed for
two seconds in response to a
Trip being started.
This message is displayed for
two seconds in response to a
Trip being stopped.
This message is displayed for
two seconds in response to a
Trip being reset.
Trips Menu
HOLD TO SET
HOLD TO SET
Start the
Trip
Stop the
Trip
HOLD TO SET
29