Alarm - INSIGHT Driver Information Center User Manual

Odometer/Clock Menu

Alarm

This screen displays the time the alarm is set to. When an * is
visible next to the time, the Alarm is set and will go off when the
Time reaches the Alarm time.
When the Alarm goes off, the display is flashed on and off with the Time on
the top line and the Alarm on the bottom line and the beeper beeps. The
alarm is canceled when any key is pressed and the display will go back to
what was displayed before the alarm went off. If no key is pressed, the
beeper will stop after 30 seconds, but the display will continue to flash. The
alarm will go off at the same time every 24 hours.
If the vehicle ignition is off, the alarm will wake the Driver Information
Center and the display will flash and the beeper will beep as above. When
a key is pressed to cancel the alarm, the Driver Information Center will go
back to sleep.
To Set the Alarm:
Until:
Back to
HOLD TO
EXPAND
Alarm
Screen
Selects
digit to
HOLD TO
EXPAND
change
This screen allows the user to set the Alarm. A flashing highlight will
appear over a digit indicating it can be changed. Pressing the "SEL" key
moves the highlight to the next digit. The highlighted digit is changed
by pressing the "SET" key. Pressing the "ON/OFF" key toggles the
Alarm on or off. If the Alarm is on, an * will appear to the right of the
time. Pressing the "BACK" key returns the display to the Alarm screen
and the new Alarm time is stored in the clock.
This screen remains displayed for up to eight seconds if no keys are
pressed, then the display returns to the Alarm screen and the new
Alarm time is stored in the clock.
32
HOLD TO SET HOLD TO SET
Press Press
HOLD TO SET
Hold
HOLD TO SET
HOLD TO SET
Until: Until:
Toggles
Alarm
ON/OFF
Changes
selected
digit