Advertisement
CAUTIONS FOR REPLACING AND HANDLING BATTERY
REPLACING BATTERY
USE ONE 9-VOLT BATTERY
Loosen the screw of pedal to open it
and take out battery from its housing.
Replace the battery with a new one.
Set coil spring onto the spring base on
the back of the pedal and shut the
cover (pedal). Finally, insert thescrew
into the pedal guide and tighten it.
At this time, be careful not to catch
the battery strap in the cover or coil
spring.
CAUTIONS
• When the HM-2 is not in use for a long
period, remove the battery to prevent
the
trouble
caused
by
the battery
leakage.
• If
the
battery
voltage drops, effect
becomes inferior or no sound is prod¬
uced.
To prevent that, replace the
battery.
• Be sure to keep the battery securely
connected
even while using the AC
Adaptor, then the HM-2 will continued
to operate even if the AC Adaptor cord
comes out during performance.
• Unplug the cord from the INPUT jack
when the HM-2 is not in use to avoid
wasting the battery.
AC ADAPTOR (OPTION)
Use BOSS AC adaptor
for AC operation.
Use of different
adaptors may cause
improper operation
or no sound.
BOSS ACA-120
FOR 117V AC
BOSS ACA-240
FOR 240V AC
BOSS ACA-220
FOR 220V AC
Advertisement
