Graco 239-139 Instructions-Parts List

Air control conversion kit

INSTRUCTIONS-PARTS LIST

This manual contains important

warnings and information.

READ AND KEEP FOR REFERENCE.

INSTRUCTIONS

239–139 Air Control Conversion Kit

Converts 113–156 Air Control Assembly to

113–896 Air Control Assembly.

150 psi (10 bar) Maximum Air Inlet Pressure

Table of Contents

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Graco Warranty and Disclaimers

Toll-Free Graco Phone Number

GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441

. . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . .

Graco Inc. is registered to I.S. EN ISO 9001

308–698

Rev. A

7102A

Table of Contents

Need help?

Do you have a question about the 239-139 and is the answer not in the manual?

Page 1 Toll-Free Graco Phone Number ....GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441 COPYRIGHT 1997, GRACO INC. Graco Inc. is registered to I.S. EN ISO 9001...
Page 2 Installation Disassembly Installing the 239–139 Conversion Kit 1. Install the tee (1), adapter (2), control valve (3), WARNING and swivel (4) as shown in Fig. 2. 2. Reinstall the tube fitting (B) in the tee (1). To reduce the risk of serious injury whenever you are instructed to relieve pressure, always follow the 3.
Page 3 Operation Changing Drums 3. Set the director valve (E) to UP to raise the ram plate. At the same time, carefully equalize the pressure in the drum by operating the air release WARNING valve. MOVING PARTS HAZARD 4. Raise the ram plate until it is completely out of the Moving parts can pinch or amputate your drum.
Page 4 Graco distributor to the original purchaser for use. Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defec- tive.