Joy Stick (Option - Toyota 8FG35N Manual

WARNING
• Always operate the attachment levers from a normal seated position.
• If the OPS is activated, fully release the accelerator pedal, return all levers to the neutral
position and return to the normal seated position to deactivate the OPS.
• After the OPS is activated, if you return to the normal seated position while the lever(s)
are operated, the OPS will not be deactivated and the forks will not move due to the re­
turn­to­neutral function. Always return all levers to the neutral position before returning to
the seat when deactivating the OPS.
10.18.6 Horn switch
(1)
(1) Horn switch
10.19 Joy stick (Option)
10.19.1 Direction control lever
(1)
(2)
(1) Forward travel
(2) Reverse travel
Press this switch to sound the horn.
Shift lever to change the travel direction
between forward and reverse.
Forward travel ­ Push the lever forward
Reverse travel ­ Pull the lever backward
The neutral position is halfway between the
forward and backward position.
Forward and reverse travel speed can be ad­
justed by the amount the accelerator pedal is
depressed.
CAUTION
• Always operate the control lever from a normal seated position.
• The engine cannot be started unless the direction control lever is in the neutral position.
• Stop the truck before shifting between forward and reverse.
NOTICE
• To restart powered travel after the activation of OPS, release the accelerator pedal, return
the direction control lever to the neutral position and sit in the seat. Sitting in the seat
without returning the direction control lever to the neutral position will not allow powered
travel.
• The position of the direction control lever may vary depending on the truck specifications.
10.19.2 Load handling lever
(3)
(1)
(4)
(2)
(1) Forward tilt
(2) Backward tilt
(3) Lift
(4) Lower
WARNING
• Always operate the load handling lever from a normal seated position.
• If the OPS is activated, fully release the accelerator pedal, return all levers to the neutral
position and return to the normal seated position to deactivate the OPS.
• After the OPS is activated, if you return to the normal seated position while the lever(s)
are operated, the OPS will not be deactivated and the forks will not move due to the re­
turn­to­neutral function. Always return all levers to the neutral position before returning to
the seat when deactivating the OPS.
10 SWITCHES AND LEVERS
Lever to tilt the mast forward and backward
and lift and lower the forks.
Forward tilt ­ Push the lever forward
Backward tilt ­ Pull the lever backward
The forward or backward tilting speed can be
adjusted by the amount the accelerator pedal
is depressed and the amount the lever is
moved.
Lift ­ Push the lever to the right
Lower ­ Push the lever to the left
The lifting speed can be adjusted by the
amount the accelerator pedal is depressed
and the amount the lever is moved.
The lowering speed can be adjusted only by
the amount the lever is moved.
en‐27
10