Protect Your Investment With Toyota Genuine Parts; Periodic Maintenance And Replacement - Toyota 8FG35N Manual

18.3 PROTECT YOUR INVESTMENT WITH TOYOTA GENUINE
PARTS
Why gamble with your valuable assets? When your forklift needs periodic maintenance ­ as
every forklift does ­ you need Toyota Genuine Parts.
The same parts used on Toyota assembly lines ­ meeting the same tough Toyota standards
for "PERFORMANCE", "DURABILITY", and "SAFETY".
TOYOTA GENUINE PARTS
Offer Excellent Dust­catching Perform­
ance on:
e.g. Air element, Torque converter oil filter,
Return oil filter, Engine oil filter Fuel filter
TOYOTA GENUINE PARTS
TOYOTA GENUINE PARTS Offer Supreme
Durability on:
e.g. Clutch disc, Radiator hose, V belt
TOYOTA GENUINE PARTS
Offer Added Safety on:
e.g. Lift roller, Lift chain, Tie­rod end, Brake
shoe
Call your Toyota authorized shop for after­sale ser­
vice
With high quality TOYOTA genuine parts and superior
service technology, Toyota helps keep customer's fork­
lifts in the best condition for efficient work and higher
productivity. We deliver satisfaction to the customers
with Toyota genuine parts.
IF YOU USE A NON­GENUINE ENGINE OIL
FILTER:
1. Clogging may result, which can lead to
engine seizure.
2. The engine oil may become dirty faster,
necessitating frequent oil changes.
3. It can pass dirty oil to the engine, caus­
ing engine wear.
IF YOU USE A NON­GENUINE RADIATOR
HOSE:
1. The hose may wear out extremely rap­
idly.
2. The hose may be susceptible to water
leakage, necessitating frequent replace­
ment.
IF YOU USE A NON­GENUINE BRAKE
SHOE:
1. Braking performance may be excessive,
insufficient, or erratic, which is danger­
ous.
2. The brakes may drag. wasting fuel or
battery power.
18.4 PERIODIC MAINTENANCE AND REPLACEMENT
Periodic inspection and maintenance are necessary to keep your Toyota industrial truck
running safely and smoothly. The maintenance experts at the Toyota dealer are specially
trained to use the right tools and approved procedures to protect the investment you have
made in this high quality truck. Do not entrust it to amateurs.
The designated numbers of hours in the inspection cycle are as follow:
Daily (pre­operation check)­ Every 8 hours
Weekly­ Every 40 hours
Every 6 weeks­ Every 250 hours
Every 3 months­ Every 500 hours
Every 6 months­ Every 1000 hours
Every 12 months­ Every 2000 hours
If the operation time exceeds 250 hours within 6 weeks, use the number of hours as a guide
for performing periodic inspection. Pre­operation checks and weekly inspections should
preferably be performed by the user. 6­week, 3­month, 6­month and 12­month inspections
should be performed by the Toyota dealer.
Refer to the Periodic Maintenance Table to determine the inspection and maintenance items
and inspection cycles.
Use only genuine Toyota parts for replacements, and always use the recommended types of
lubricants.
18.4.1 Periodic replacement of parts and lubricants
Replacement shall be made upon arrival of the operation hours or months, whichever is
earlier.
● : Replacement
*: Change the engine oil and oil filter of new trucks at 6 weeks or 250 hours of use.
Inspection Period Every
(Accumulated hours of operation 6 weeks
or monthly periods of operation,
whichever comes sooner.)
Item Every
250 hours
Engine oil
Engine oil filter
Engine coolant except LLC (every 2
years for LLC)
Fuel filter
Torque converter oil
Torque converter oil filter
18 PLANNED MAINTENANCE
Every Every Every
3 months 6 months 12 months
Every Every Every
500 hours 1000 hours 2000 hours
●* ● ● ●
●* ● ● ●
● ● ●
● ●
● ●
● ●
18
en‐79